town border coords

Discussion in 'Help & Support / Errors & Bugs' started by tomkear, Dec 11, 2011.

  1. tomkear

    tomkear Builder
    Builder ⛰️ Ex-President ⚒️⚒️

    Joined:
    Nov 13, 2011
    Messages:
    22
    Trophy Points:
    25,400
    Ratings:
    +0
    i have 100 blocks placed ffrom post A to B.

    A-1492
    B-1393

    this says it is a distance of 99 blocks, when i have checked so many times it is 100, just wondering when i apply for mayor if i state my town is 100x100, and the coordinates only show a change of 99 blocks, would that matter?

    EDIT: i changed the layout slightly

    from corner to corner its 101x100, which gets coords correct, when i post to the application on size, is itfrom corner to corner?
     
  2. Jetscat

    Jetscat Builder
    Builder ⛰️ Ex-EcoLeader ⚜️⚜️⚜️

    Joined:
    Oct 8, 2011
    Messages:
    4,073
    Trophy Points:
    44,490
    Gender:
    Male
    Ratings:
    +995
    Here's what i did....

    First I started at my A post placed it on the floor (The sign) placed 100 blocks from the sign, towards the next sign so like this:

    A----------------------------------------------------------------------------------------------------B
    ( A=Post A, B= Post B, -= Grassblocks.)
    As you see I started Post A, then placed 100 blocks in the same direction, until the 100th block, then I placed sign B
    If you have any question further on, let me know. Also you can always contact a SuperMod to do it, I know Sios places post's for 1,000 $ a post. Hope this helped. :)