ExtCreations Signs Tutorial

From EcoCityCraft
Jump to: navigation, search

Lifts

When you click a lift sign you will be teleported to another lift sign at a different Y coordinate, which means that all lift signs must be in a straight line if you want them to connect to each other.

First line

This line is optional.

Write the name of the floor. When arriving at this sign a chat message will say Floor: Floorname; color codes can be used. If the line is left blank the chat message will read You went up/down a floor.

Second line

Write [lift up] if you want to travel upwards to another lift sign. Write [lift down] if you want to travel downwards to another lift sign. Write [lift] if you want to create an arrival sign which you cannot depart from.

Third and fourth line

This line is optional.

You can write anything here, for example an informative message which could inform users about the lift sign destination.

Doors and Bridges

First line

Do not write anything here.

Second line

Doors

Write [door up] if the sign is below the door or [door down] if the sign is above the door.

Bridges

Write [bridge] on this line and continue with the next.

Third line

This line is optional.

Write a number ranging from 0 to 5. This defines how many blocks to the left of the door/bridge are affected by it. This line will default to 1 if left blank.

Fourth line

This line is optional.

Write a number ranging from 0 to 5. This defines how many blocks to the left of the door/bridge are affected by it. This line will default to 1 if left blank.

Usable materials

The following materials can be used for doors:

  • Stone
  • Cobblestone
  • Wood planks
  • Glass
  • Sandstone
  • Double stone slabs
  • Ice
  • Snow block
  • Netherrack
  • Soul sand
  • Stone bricks
  • Mycelium

The following materials can be used for bridges:

  • Wood planks
  • Glass
  • Sandstone
  • Double stone slabs
  • Ice
  • Snow block
  • Netherrack
  • Soul sand
  • Stone bricks
  • Mycelium

Examples

Doors

3 blocks to the left, 1 block to the right.
3 blocks to the left, 5 blocks to the right.

Bridges

2 blocks to the left, 1 block to the right.
0 blocks to the left, 2 blocks to the right.

Gates

Place a fence that is at least two blocks high and surrounded by walls. Place a sign on either side of the fence on its border, please refer to the example screenshots below. Remember that the top level of the fence will stay once the gate is activated.

Write [gate] on the second line and finish editing.

Usable materials

The following materials can be used for gates:

  • Oak wood fence
  • Nether brick fence
  • Iron bars

Examples

An iron bars gate (closed).
An iron bars gate (opened).
An oak wood fence gate (closed).
An oak wood fence gate (opened).

Hidden switches

Hidden switch signs can be placed on the back of a block. They will trigger an adjacent button or lever if the block they are placed on is right-clicked.

First line

This line is optional.

You can define a required key here. Write the name of an item on this line. Right-clicking the block will not activate the sign unless the player is holding the specified item in their main hand.

Second line

Write [x] on this line and stop editing the sign.