Minecraft Username: PixelGuy75 Brief Description: The values for setting the walk-speed flag are not correct. Should be between 0.1 to 10 as stated on the wiki: "Values as low as 0.1 are possible, up to as high as 10.0." Instead only values 0.1 to 1 are working, anything above 1 has no change. I found that if you try something like walk-speed 0.5, it matches doing /speed 5 in a region with no speed flag set. So the only way to getting working values is by dividing the speed that you want by 10. Instructions: Set the walk-speed flag in a region to 1.0. Then change it to anything from 1-10. How many times did you recreate this? 3-4 times Result: The walk speed won't change, only values from 0.1 to 1 will have an effect on the region. Expected Result: Should match the values as if you were doing the speed command.
Looks like we gave the wrong information on our wiki page. I've now updated it; see below for revised walk-speed values: https://ecocitycraft.com/forum/wiki/main-towncontrolplus3/ The speed command is a completely different system. Walk-speed flag speeds are seperate values. You'll have to fiddle with them to get what you want.